Candace Robertson

One educator, determined to create an engaging and dynamic experience for learners of all ages.

Tag Archives: makered


by Leave a comment

Makey Making Digital Citizenship Connections

Digital citizenship.  It’s a multi-faceted concept that we model as educators and embed into lessons to help our students understand how to navigate, analyze, interact with, and create with digital technologies.  But, what does digital citizenship mean to a middle schooler? How do our young students process and connect with such a big concept?

Using the guiding questions above, I tried to think of a new way to help students see some of the key components of digital citizenship.  It’s one thing to understand the umbrella concept, but why are these components important and how do they interact to help us become good digital citizens?

Materials:

  • Makey Makey™ MaKey MaKey Digcit Setup
  • Digcit Scratch project
  • Magnifying glass: Critical literacy
  • Spoon:  Balance of screen time as well as “going with our gut” in digital communication
  • Padlock: Digital security and protection
  • Play-Doh®: Digital rights and responsibilities, advocating for ourselves and our digital footprint
  • Elmer’s Glue:  Digital rights and responsibilities, how to clean up a “digital mess”
  • Paint brush with copper tape: Digital law, creative credit

What worked:

  • Students were active members of the discussion.  THEY were a key component, just as they are in digital citizenship.
  • We plugged one item into the Makey Makey™ at a time as we discussed the component.  We started to make rhythms as we plugged in items, allowing students to understand the relationship between the components and how they interact.
  • With the Elmer’s Glue, we got to focus on the fact that miscommunication and misrepresentation happens.  For the first time, I felt that I got to address the fact that there will be “digital messes” that need to be cleaned up.  Guess what, the digital citizenship machine still works!  We just have to learn from our experiences and do what we can to make sure to keep ourselves out of sticky situations. (sidenote: you should’ve seen their faces when the glue actually triggered the noise!)

Things to change for the next go-round:

  • I changed some of the noises in my Scratch project because I found they were too quiet in the classroom setting and weren’t distinct enough to be heard in the mix of components.
  • My goal was to have enough time to have the class join hands and play together, to demonstrate how a community of good digital citizens can take on bigger challenges.  Unfortunately, I only had 30 minutes for this lesson so we could only discuss this and didn’t get to the culminating activity.  I am hoping that by streamlining some of the setup, we can get this in.

Because of the nature of my job, I will be doing this lesson with a few other classrooms so I’ll be sure to update the post with new takeaways.  Here’s to Makey making digital citizenship come alive in a new way for students!

Creative Commons LicenseMakey Making Digital Citizenship Connections by Candace Marcotte is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


by Leave a comment

Getting a MAKEover: Part III…What do they take away?

This is the third post in the series about the development of our middle school makerspace in our library.  Thanks @jrosenberg6432 for asking some great questions, which were used as the basis for the three posts.  Check out post one to see where we started and post two to see what we do!

“What things do kids take away?”

First, there’s the question of literal takeaways.  What do students physically carry out of the space and keep?  Currently, students can keep some of the items that they create, but not everything.  Because we are 1:1, a lot of artifacts that they create are either digital and housed on their individual devices (movies, etc.) or we turn them into digital artifacts by blogging to document their learning/experiences with images, videos, and text.  Due to cost, students can’t keep the kits and more expensive items, so that’s one of the reasons why we blog.  They always have at least a picture or a video to take away!  We do allow them take home/keep the consumable items like conductive thread, coin cell batteries, conductive tape, LEDs, and crafting materials (paper, cardboard, felt, etc.) because they have a lower price point.  I’ve even had a few students borrow goggles to work on reverse engineering at home. Now that our Makerbot and Cricut are all set up, they will begin to take home those artifacts and the prototypes that they have designed as well.

More importantly, I think that they’re taking away some bigger things like independence, perseverance, creativity, and critical thinking.  They are learning how to share their knowledge, collaborate in positive manner, and connect with others.  They are learning how to appropriately make their learning public.  They are learning that with a little effort, they can do some pretty extraordinary things! Now those are some incredible takeaways…and it’s only just the start!

Maker Impact GIF

Creative Commons License
Getting a MAKEover: Part III…What do they take away? by Candace Marcotte is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.


by 2 Comments

Getting a MAKEover: Part I…Taking the First Steps!

Recently, a member of my PLN, @jrosenberg6432 asked me a few simple questions about the development of our middle school makerspace.  I’ve been trying to wrap our progress into a neat little bundle, but I came to the conclusion that it’s big and messy!  There’s SO much that encompasses how our learning environment is getting a MAKEover, from the physical space to the mindset.  The culture itself is getting a MAKEover.  So, I decided to break the responses to @jrosenberg6432‘s great questions into a few separate posts…maybe one step towards neater little bundles (let’s at least pretend!)?

 

“How did you setup and start the space?”

 

The Initial Rollout
The development of our makerspace has been a work in progress since around last February when we purchased some initial kits and introduced them to our after school Tech Club (check out my original post).  We decided to start with Tech Club so that we could determine how long it would take students to complete projects and to observe things like perseverance and innovation.  This also allowed us to get feedback on what activities sparked middle school interest the most and how they handled challenges.  At the beginning of this year, we actually started to use the term “makerspace” in our school.  Instead of Tech Club, we introduced it as “Tech Club in the Wildcat Makerspace.” I’m hoping we will be able to change the name totally next year and just call the group the “Wildcat Makers or Wildcat Makerspace.”  With the introduction of this new terminology, we still continued to focus on the after school club because I was the sponsor and could roll things out at a faster rate and it was still about the education piece of helping people understand what the Maker Movement is all about (check out Dale Dougherty’s TED Talk: “We are Makers”).  Also, it allowed us to push out to all grade levels at once.  We had about 50 students show up at our first meeting of the year with this new terminology!  Last year, I had about 20 students at the first meeting so this was a decent jump.  I have to immediately acknowledge my colleagues @oconnorscience and @ajsullivan77 who joined me as co-sponsors to make some magical maker things happen for our students!

 

The Materials
With the energy that was created in our first few after school meetings this year, I worked with the technology facilitator at the other middle school in the district to submit a grant to a local community organization.  Prior to this, we received a small grant from our PTA which allowed us to buy additional kits and consumable materials, but we were ready to take a big jump!  Our initial grant that we submitted to our local community organization focused on beefing up STEM opportunities for our students with a Makerbot and Cricut.  Our vision from the beginning has been to infuse this maker culture into all classrooms by integrating these technologies into all content areas.  Therefore, we connected with a variety of content area teachers in each of our buildings and they joined in on the grant.  The organization was so excited about our plan to integrate these technologies, that they asked us to submit a wishlist of our dream materials…how often does that happen?!  The fine folks of #MakerEd helped A TON in finalizing our wishlist materials.  When the decision was final, we actually ended up receiving $30,000 in grant funding.  It’s important to understand a bit more of our context- we have about 900 students in each of our buildings and we planned for the materials in our grant to last a minimum of  two years.  We did discuss submitting a Phase 2 of the grant which will focus on the design of the space as well as additional tools (sewing machine, video setup including boom mic, etc.).  We are incredibly lucky to have this support and funding and we do not miss a beat in counting our blessings.

 

The Space
My office is in our library.  I never really felt that the space was mine at all until getting our librarian (a colleague who I work closely with) on board for the whole makerspace initiative.  We discussed it, she went to a librarian’s conference and heard about the impact it had on circulation and she was ready to go!  This allowed us to start making changes in the physical layout of the library.  I don’t have a very good image of what it looked like when we started, but I’ve included a semi-decent one below.  Imagine that to the right of this image are these large wooden study carrels.  Think of our library as a silent and isolated space.
Our library before the makerspace.
Slowly, we began to alter the physical space after getting administrator approval.   This came with the knowledge that the space would become collaborative…and if there was ONLY one thing we accomplished this year, it would be to get rid of those study carrels!  They represented the antithesis of the culture shift that we were trying to make.

 

We first started by moving some book shelves around to create a little nook-like space.  The librarian and I joke that everything in terms of furniture in the makerspace came from the garbage- and it’s partially true.  We didn’t have any funding for furniture itself (the grant did include $ for storage, but phase two will focus on design), so we had to get thrifty!  Just by taking walks around the building and looking in some spaces that stuff seems to pile up in, we were able to accumulate a coat rack for lab coats and safety gloves, half-circle tables, a curved table, two monitors, and other odds and ends.  We also began collecting items like lamination scraps, broken tools/tech, cardboard, Styrofoam, and bubble wrap. The pics below show where we’re at today.

This slideshow requires JavaScript.

Our makerspace now takes up almost half of our library!  We wanted to make the space interactive to stimulate curiosity, play, and creativity.  We took paper and covered the tables, set up a MaKey MaKey tinfoil piano on the back of a bookshelf, and used lamination scraps to create a “Doodle Wall.” Because of the buy-in from our librarian, she was able to clear out some books and dedicate shelves for materials.  I can’t tell you how amazing this has been as a storage solution!  The excellent part is that everything is accessible and easy to grab and go- which is exactly what we want.  I keep the tools and needles locked in my office so that we know where those are at all times.  Safety first!  I still look at it as being in the start up phase.  We are always thinking of ways to improve the space…someone walked in a few weeks ago and said, “I swear this place is always changing.”  We took it as a compliment over confusion because what was once a stagnant space is now dynamic and flexible.

 

Our end goal is to have every day be a maker day – not just after school one day a week.  For example, we want to carry out our vision of integrating materials into daily lessons in all content areas (see our grant examples here) and  @oconnorscience created a makerspace corner in her classroom with legos, puzzles, and random items after seeing what was going on in the library.  We want to infect the building with this spirit and energy 🙂  We are in the process of transitioning from the Tech Club mainly using the items, to publicizing that everyone has access now that we have more materials in from our grant orders.  Students have been coming to create on random days, in addition to our Tech Club meeting.  We are going to label the material boxes with QR codes that attach to a Google Form sign out sheet so that students know that they are able to check out the materials in the space and create at any time, while still being held accountable (can’t take home for now, just use in the space or in the classroom).  We don’t want to make it too formal because we want to encourage random tinkering, but we do want students to know that the expectation is for every piece to come back so that others can play later.

 

If I had to pick 2 words to represent the initial phase of implementation, they would be VISION and COMMUNITY.  Without both, it would have been a challenge to get this maker party started!
Creative Commons License Getting a MAKEover: Part I…Taking the First Steps! by Candace Marcotte is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.